PIR Additional Sensor – 1.6km range

Probe - web.jpg
Probe - web.jpg

PIR Additional Sensor – 1.6km range

189.00

Our additional PIR Sensor can be added on to our PIR alert kit, to enable you to monitor additional entranceways or other locations.

Batteries:
Quantity:
Add To Cart

We offer a 30 day money back guarantee


Product Features:

  • Additional sensor to monitor more than one entrance way or area you wish to protect.

  • Up to 1.6km line of site between driveway and house

  • Wireless, no wiring required

  • Monitor up to 16 entrance ways on the one system, with a variation of sensor types


Product Includes:

  • 1 x Outdoor sensor

  • Mount plates

  • Screws to mount sensor

  • 1 x Instruction Sheet


How it works:

The Sensor is set up on the driveway or entrance point you want to monitor.  The sensor has an adjustable detection range from 7 to 30 metres, it is set up at a 15 metres by default so any moving heat source (ie person, car or large animal) moving within 15 metres will activate the sensor. The sensor is designed to ignore small animals such as cats, dogs, rabbits etc. Because the sensor detects moving heat sources, it will not be triggered by moving trees or shrubs. 

Upon being activated, the sensor will send a signal back to your receiver unit (which notifies you – so usually set up in your house, shed, office etc).  

The kit has a range of 1.6km (1.0 mile) between the sensor and the receiver.


What else do I need to know?

  • The sensor is powered by 1 x 9V battery. 

  • The receiver (in the house) is powered by a plug pack, which plugs into a wall socket (this is included in the kit).

  • Your receiver has four different volume levels.

  • You can program your receiver to play one of 12 tunes.

  • If you have more than one sensor connected to your receiver, you can program your receiver to play a different sound for each sensor to help you identify which entranceway someone has entered by.


 Compliance

This product is compliant with NZ & Australian Radio Regulations.