This bell can be used with any of our driveway alarms. This bell can be used outside, but may also be used inside for those with hearing problems.
Will only function on a Receiver with two relay outputs.
This bell can be used outside, but may also be used inside for those with hearing problems.
The bell sounds similar to a school fire alarm.
No power required, plugs directly into the receiver.
1 x bell
How it works
The Repeater is used to boost the signal or lengthen the range from the sensor to the house. Predominantly used where there is a hill in the way.
No power is required for this option, so this point could be a up on a hill or in the middle of the bush. Can be located at any point within 1.6km of the sensor and re-transmits a signal a further 1.6 km to the house.
What else you need to know
The repeater is powered by a Solar Panel via a 7.0 A/H Battery (this is included in the kit).
Your repeater has four different volume levels.
You can program your receiver to play one of 12 tunes.
If you have more than one sensor connected to your receiver, you can program your receiver to play a different sound for each sensor to help you identify which entrance way someone has entered by.
If more than 1 Sensor is learnt into the repeater - it will only transmit a single signal to the house.
This product is compliant with NZ & Australian Radio Regulations.