Probe Alert Kit
Vehicle only detection driveway alert kit, with Alert Receiver.
Try now, with our 30 day money back guarantee
Product Features
Complete kit to cover one driveway/access.
Up to 1.6km line of site between Probe Sensor and Alert Receiver.
Alert Probe has detection coverage up to 3m either side of it.
Only detects the motion of vehicles, not animals or people.
Wireless, no wiring required.
Kit can be expanded to cover up 16 entrance ways.
Product Includes
1 x Probe sensor
1 x outdoor transmitter (Rubber weatherproof Seal)
1 x Alert Receiver
1 x plug pack for Alert Receiver
Product Code: DCPA-4000-ANZ
How it works
The Probe Sensor is set up on the driveway or in any area you want to monitor. The Probe sensor has a detection range of 3 metres either side of it. The Probe Sensor is designed to detect anything metallic, so it will ignore people and animals. Because the sensor detects metallic items, it will not be triggered by moving trees or shrubs. The Probe is normally buried under the drive (approx. 100 mm) and has a 15 metre cable connected to the Transmitter box which is mounted on a post or tree.
Upon being activated, the Transmitter will send a signal back to your receiver unit, which plays a tone to alert you – so is usually set up in your house, shed, office etc.
The kit has a range of 1.6km (1.0 mile) between the probe and the receiver.
What else do I need to know?
Probes
The Probe (on the driveway) is powered by batteries.
Receiver
The Alert Receiver (in the house) is powered by a plug pack, which plugs into a wall socket (this is included in the kit).
Your Alert Receiver has four different volume levels.
You can program your Alert Receiver to play one of 12 tunes.
If you have more than one Probe Sensor connected to your receiver, you can program your receiver to play a different sound for each Sensor to help you identify which entranceway someone has entered by.
Compliance
This product is compliant with NZ & Australian Radio Regulations.
